
Products
- Electrical safety & Testing Instruments
-
Electrical safety & Testing Instruments
Proudct name:MULTI-Functional Wire Tracker FWT01
Mode:FWT01
Measuring range:
HS Code:9031809090
Catalog PDF:
Previous:
True RMS Value Digital Multimeter ADM08A
- Applications
- Key Features
- Specifications
- Accessories
This product is a multi-functional handheld cable testing tool. It has wide application with reinforced cable types and multiple functions, which is a necessary testing tool for telecommunication engineering, wiring engineering and network maintenance personnel
* Cable hunting: Directly hunt the cable with RJ11, RJ45 and BNC terminal and other metal leads through adaptor.
* When cable is hunted, there is no need to strip off cable sheath, which is easy and quick to judge the location of breakpoint in cable.
* It can directly hunt cable when weak current equipment is turned on, such as Ethernet switch, router.
* Test network cable: It can fully test the line sequence of network cable, open circuit, short-circuit, miswire, reverse connection and splitpairs.
* Test line level, positive and negative polarity.
* Test the status of telephone line: It can test the working status of telephone line (idle, ringing, and off-hook) and judge TIP or RING line.
* Check lead continuity.
* Test the connection between network cable and switch port.
* It provides low voltage prompt function and the receiver has installed spotlight
* When cable is hunted, there is no need to strip off cable sheath, which is easy and quick to judge the location of breakpoint in cable.
* It can directly hunt cable when weak current equipment is turned on, such as Ethernet switch, router.
* Test network cable: It can fully test the line sequence of network cable, open circuit, short-circuit, miswire, reverse connection and splitpairs.
* Test line level, positive and negative polarity.
* Test the status of telephone line: It can test the working status of telephone line (idle, ringing, and off-hook) and judge TIP or RING line.
* Check lead continuity.
* Test the connection between network cable and switch port.
* It provides low voltage prompt function and the receiver has installed spotlight
* Wire track: Directly track wire type: RJ45, RJ11, Track other wire through the attachment
* Sequence collation: Open circuit, short circuit, detection of cable line sequence
* Network wire collation:
Test device used with UTP (Unshield Twisted Pair) and STP(Shield twisted Pair)wiring;
Tests for open circuits, shorts, miswires,reversals and split pairs;
Allow one person to test T568A,T568B,10Base-T and Token Ring
* DC Level test: DC level test
* Telephone line test: Identify the state of working telephone line ( clear, ringing, busy)
* Continuity: Judge continuty of the cables or wires
* Switch port collation: Detection switch connected condition
* Product weight: Receiver: 120g; Emitter: 160g
* Catagory: CE CAT.III 300V
* Sequence collation: Open circuit, short circuit, detection of cable line sequence
* Network wire collation:
Test device used with UTP (Unshield Twisted Pair) and STP(Shield twisted Pair)wiring;
Tests for open circuits, shorts, miswires,reversals and split pairs;
Allow one person to test T568A,T568B,10Base-T and Token Ring
* DC Level test: DC level test
* Telephone line test: Identify the state of working telephone line ( clear, ringing, busy)
* Continuity: Judge continuty of the cables or wires
* Switch port collation: Detection switch connected condition
* Operating temperature: 0 °C ~ 40 °C, maximal 80% relative humidity (non-condensing)
* Storage temperature:-10~50°C, maximal 80% relative humidity (non-condensing, battery not included)
* Altitude:<2000m( meter)
* Anti-explosion rating:IP 40
* Distance of emitting signal :300m or so
* Power supply: Receiver: 9V 6F22 battery, Emitter: 3 x 1.5V AA
* Product weight: Receiver: 120g; Emitter: 160g
* Catagory: CE CAT.III 300V
* 1.5AA batteries x 3pcs
* 9V battery x 1pc
* headphone x 1pc
* RJ11 cable x 1pc
* test clips from RJ11 terminal x 1pc
* 9V battery x 1pc
* headphone x 1pc
* RJ11 cable x 1pc
* test clips from RJ11 terminal x 1pc