BESTONE INDUSTRIAL LTD.

Products - Non-destructive Testing Instruments - Non-destructive Testing Instruments

Proudct name：Surface Roughness Tester SRT-6100

Mode：SRT-6100

Measuring range：0.05~10.00 μm

HS Code：9031809090

Catalog PDF：

Previous： Basic Type Coating Thckness Gauge Built-in F&NF CM-8828

Next： Multi-mode Thickness gauge MT180/MT190

Applications
Key Features
Specifications
Accessories

Widely used in production site to measure surface roughness of various machinery-processed parts, calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters.

* Be compatible with four standards of ISO, DIN, ANSI and JIS. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz.
* Highly sophisticated inductance sensor.
* Small in size, light in weight and easy to use.
* Manual or automatic shut down.
* Metric /Imperial Conversion.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.

* Display:4 digits, 10 mm LCD, with blue backlight
* Parameters: Ra、Rz
* Measuring Range: Ra：0.05~10.00 μm;Rz：0.1~50.0 μm
* Accuracy: ≤ ± 15%
* Fluctuation of display value:Not more than 6%
* Sensor
Test Principle:Inductance type
Radius of Probe Pin:10 μm
Material of Probe Pin:Diamond
Measurement Force of Probe: 16mN（1.6gf）
Probe Angle: 90°
Vertical Radius of Guiding Head:48 mm
Maximum driving stroke: 12.5 mm / 0.5 inch
Cutoff length (l):0.25 mm / 0.8 mm / 2.5 mm optional
* Driving speed
Sampling:When Length = 0.25 mm, Vt = 0.135 mm/s; When Length = 0.8 mm, Vt = 0.5 mm/s;When Length = 2.5 mm, Vt = 1 mm/s
Returning:Vt = 1 mm/s
* Resolution
0.001 μm, if reading ＜ 10μm; 0.01 μm, if 10μm ≤ reading ≤ 100μm;0.1 μm, if reading ≥ 100μm
* Evaluation length:1~2 L optional
* Auto Power Off
* Operating conditions: Temperature: 0~50 ℃ Humidity: ＜ 80 %RH
* Power Supply: 4 x 1.5v AA size (UM-3) battery
* Dimensions:Main Unit: 128 x 80 x 30 mm;
* Weight:280 g

Standard Accessories:

1. Main Unit
2. Small Screwdriver
3. Standard Sample Plate
4. Standard Sensor
5. Carrying Case
6. Instruction Manual

Optional Accessories:

1. USB, RS-232C data cable with software
2. Bluetooth data out put with software