
- Applications
- Key Features
- Specifications
- Accessories
User can plug data logger straight into PC’s USB port without any cables. Before getting started, user need to install USB driver and DGraphTM software, provided on the CD which is included in product packing box. All the software can run under Windows XP, Vista, 7 or 8(32 bit and 64 bit Versions). User can easily use DGraphTM software to setup sample rate, high/low alarm limit and start/stop method, and download data to PC, etc.. And then user can view, analyse and print the data, or export other file formats(txt, xsl, csv, bmp, jpg).
Especially, for some professional applications, user can set access password, name each channel, enable/disable specified channel, input calibration data for each channel, disable LED indication for saving power, and select sample mode(Instant, Average, Maximum and Minimum), etc
* Easy to log and analyse data
* Unique and uniform PC software DGraphTM can meet your higher requirements
* Elaborate design make it perfectly work in more application field
* Strict design ensure long term reliable work
* Enhanced electrostatic protection design to prevent unexpected damage
* Each unit have single serial number identified by DGraphTM software to manage data simply
* All data from different data logger and all different measurement parameters can be graphed and analysed together
* USB interface directly communicate with PC for setup and data download
* User can set access password for data logger
* User can name each channel and enable/disable specified channel freely
* LED alarm enable/disable, LED alarm hold enable/ disable and alarm limit settings for all channels via DGraphTM
* User can input formula to customize compound line
* User can create and customize new unit easily and freely
* Logging status indication via red/green LED and battery status indication via yellow LED
* Start logging method: Immediately, Button, Delayed
* User can input two point calibration value for each channel when setup
* Replaceable lithium battery and logged datas are not lost if battery exhausted
4~20mA Current Loop |
Measurement range |
4 to 20mA |
Accuracy(Typ.) |
±1%±1count |
|
Resolution |
0.05mA |
|
Memory Capacity |
64KBytes |
|
Sample Rate |
1sec. to 12hr. |
|
Start Method |
Immediately, Start by button, and Start at date&time |
|
Stop Method |
Stop when memory full, overwrite when memory full, stop by button and stop until specified number of sample points finished |
|
Sample Mode |
Instant(default), average, maximum and minimum |
|
Button |
Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold |
|
LED |
Red&green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished) |
|
Alarm |
User programmable high or low alarm limit for each channel(If necessary) |
|
Communication |
Direct USB connection |
|
PC Software |
DGraphTM software and USB driver required (Included on CD) |
|
Power Supply |
User replaceable 1/2AA 3.6V Lithium Battery 1200mAh |
|
Battery Life |
Approx. 3 Years @ 1 Minute Sample Rate |
|
Internal Input Impedance |
120Ω |
|
Operating Range |
0 to 100%RH -35 to 80℃(-31 to 176℉) |
|
Storage Range |
Recommended: 20 to 60%RH 10 to 50℃(50 to 122℉) |
|
Case Material |
ABS |
|
Dimentions |
130mm×37mm×23mm(5.1"×1.5"×0.9") |
|
Weight |
Approx. 69 grams(2.43oz) |
|
Standard Compliance |
CE |
* CD with USB driver x1pc
* Quick start guide x 1pc
* 1/2 AA 3.6V lithium battery x 1pc
* Cable(Optional) x 1pc